Every safety recall published by the Australian government, searchable and filterable.
Airbag inflator: As it gets older, a combination of high temperatures and humidity can cause the airbag inflator propellant to degrade. If an affected vehicle is involved in a coll…
The Automatic Clutch Unit (ACU) has two motors that operate the clutch. The ACU motor may not operate correctly if wear occurs on the internal brush. If one motor fails, the other…
On affected vehicles, one of the parts in the internal play compensator mechanism in the rear brake calliper may no longer work in the long term.
On affected vehicles, the parking brake lever and actuating spindle on the rear callipers may be corroded.These parts contribute to engaging the parking brake, the effectiveness of…
On affected vehicles, the parking brake lever and actuating spindle on the rear callipers may be corroded.These parts contribute to engaging the parking brake, the effectiveness of…
There is a potential problem with the gear shift lever due to an error in the manufacturing process.
During assembly the vehicles may not have had the front brake tube fitted correctly. The tube may come in contact with the exhaust system and the braking performance could be compr…
A rear seat backrest may be fitted on which the mounting for the head restraint is not correctly welded to the outer backrest frame for the rear seat.
A concern may exist with the software in the vehicles Audio 20 control unit that will affect the automatic occupant detection for the front passenger seat in the vehicles effected.
There is the possibility for engine oil to leak from one of the hydraulic tensioner's on each of the cylinder heads on the engine.
The fuel tank may be compromised due to damage incurred by a manufacturing process.
The vehicles are equipped with a Continuously Variable Transmission (CVT) assembly that uses a torque converter to transfer engine power from the engine to the transmission.There i…
The vehicle is equipped with a stop-start system that automatically stops and restarts the engine when the vehicle is stationary (e.g. at a stop light). Due to improper programming…
Airbag inflator: As it gets older, a combination of high temperatures and humidity can cause the airbag inflator propellant to degrade. If an affected vehicle is involved in a coll…
A diesel fuel line may be incorrectly routed, causing chafing against nearby components.
In select vehicles, the supplied jack‘s label does not comply with the mandatory standard ‘Trade Practices Act 1974 Consumer Protection Notice No. 1 of 2010 Consumer Product Safety…
On some RAM 2500 and RAM 3500 vehicles, the heater hose may not be securely mounted, which will address a possible friction point, causing wear to the brake pipe assembly.
Potential failure of the inner wall of the shock absorber may cause fragments to adhere to the piston ring.
In select vehicles, there is a build issue with the steering column. As a result, the steering column cartridge screw is not to specification.
On certain vehicles, the power cable stud with an attached gasket seal may not protrude through the bulkhead adequately.
In certain vehicles, an electric line in the engine compartment may have been routed incorrectly. This line may chafe on a reinforcement strut during vehicle operation.
The airbag system in the affected vehicles could experience electrical shorting due to exposure to high inductive electrical noise in the electrical circuit, resulting in damage to…
Protrusion of the curtain airbag mounting bolt may interfere with airbag fabric in the event of deployment. Some vehicles may experience rear side, curtain airbag cushion damage w…
An internal ignition switch spring may have been manufactured with a surface defect.
An internal ignition switch spring may have been manufactured with a surface defect.