Every safety recall published by the Australian government, searchable and filterable.
Due to a manufacturing issue with the welding of the left and right front shock absorber mounting area body panels, the shock absorber may detach. This may result in a loss of vehi…
Due to a software issue, if the Vehicle Stability Control (VSC) system is turned off, it may not default to the ON setting the next time the vehicle is started. This may result in…
Due to a manufacturing defect, a fuel leak may occur from the low-pressure fuel line hose clamp. If a fuel leak occurs, this may result in an engine compartment fire.
Due to a manufacturing issue, the side airbags inflatable curtain inflators may rupture without warning.
The gas exhaust unit may not have been fitted with the required minimum 300mm distance from a combustion air intake, flue terminal ventilator, opening port, hatch or window to mini…
Due to a manufacturing issue, the side airbags inflatable curtain inflators may rupture without warning.
Due to a software issue with the Anti-Lock Brake System (ABS) the Electronic Stability Control (ESC) may fail without warning. This may result in a loss of vehicle control.
The roof hatch fitted for additional ventilation may not meet the Gas installation standard that requires caravans are fitted with a roof hatch with permanent ventilation. The roof…
Due to a software issue, the automatic network search of the emergency call system (eCall) communication module may be deactivated. In this case, the automatic and manual emergency…
Due to improper assembly during production, the rear seat runners may not be correctly aligned/locked to the seat frame rails. As a result the seats may not lock in place and may m…
The wiring harness leading to the vehicle’s horn may not be durable enough and could break due to vibration at a certain engine speed range, preventing the horn from operating.
The bulkhead pass through power cable stud with an attached gasket seal may contact the bulkhead. If this occurs it may result in an electrical arcing, increasing the risk of vehic…
Due to the improper assembly, the passenger upper seat belt screw may not be screwed into the B-pillar. As a result the seat belt may not operate as intended.
The ‘Stand Assist’ system which keeps the bike upright when stopped may not release immediately after deactivation as intended. This may prevent the rider from steering, resulting…
The compliance label on some trailers may have been printed with an incorrect Aggregate Trailer Mass (ATM) and tare mass that is lower than the actual mass of the machine. In addit…
The connection to the driver airbag may not meet manufacturing specifications. As a result the driver airbag may not deploy as intended.
The wiring harness for the rear seat-belt buckle may impair the access to the ISOFIX child seat anchoring system and prevent the child seat from being secured correctly.
The electrical brake wiring harness connectors may become detached from the crimped terminal. This may result in a reduction in the trailer’s braking performance.
Due to a manufacturing defect, the battery does not meet specifications and may experience an electrical short circuit when fully charged, which could result in a fire.
Due to a manufacturing issue with the wheel hub component, the wheel hub may become loose. If this occurs it may cause the wheel motors to seize.
Due to a software fault in the vehicle’s Electronic Control Unit (ECU) the engine may stall resulting in an unexpected loss of vehicle control accompanied by a warning light on the…
A software update issue may lead to an engine failure whilst driving and a red Check Control message "Drive faulty” may also appear.
The vehicle’s LCD instrument cluster screen may show an inverted image as a result of voltage fluctuations when operating at extremely low ambient temperatures, due to a discrepanc…
Due to its installation position, if there is liquid or liquid droplets spilt on the rear seat bench the control unit for network management may become damaged and fail.A failure o…
The motorcycle's side stand mounting bracket may become damaged over time. The side stand may fail when the motorcycle is parked.