Every safety recall published by the Australian government, searchable and filterable.
The brake fluid reservoir cap may provide insufficient ventilation to the brake fluid reservoir. This could cause a reduction in the vehicle’s braking ability.
The electrical connector of the steering column switch may not have been installed correctly and could detach resulting in steering column and steering wheel functions becoming ino…
Due to a software issue with the airbag control unit, the airbag warning lamp and warning message may not be illuminated in the instrument cluster as intended. If this occurs the v…
Due to a manufacturing issue, the right-hand engine oil separator may have been damaged prior to engine assembly and may result in an oil leak. An oil leak in the presence of an ig…
Due to a manufacturing fault the fuel pump inside the fuel delivery module could fail and result in loss of engine power.
Due to a software issue, the rear turn signal lights may be slightly illuminated when not in use and brightly flash when operating.
During manufacture the airbag control unit may not have been secured to the vehicle correctly and may either deploy occupant restraint systems unnecessarily, or fail to deploy occu…
During a previous service, incorrect software was loaded into the vehicle which could impact headlight brightness, traction control, emissions and engine control systems.
Due to a manufacturer defect the pivot struts that connect the rear suspension to the frame may break. This could cause the rear of the bike to drop onto the tyre, resulting in hea…
Due to a software issue the vehicle, when operated in Track Mode, does not display the Unit of speed (kph or mph) correctly. As a result the driver may not adequately be able to de…
Due to a manufacturing issue, the wiring harnesses of the front wheel speed sensors may be damaged and the Vehicle Dynamic Control (VDC) system may be deactivated. This could resul…
Due to a manufacturing issue, the brake caliper bolts may not have been tightened sufficiently and could become loose. If this occurs it may reduce the expected braking performance…
Due to a manufacturer defect, the brake disc may have been fitted incorrectly and could become loose and interfere with other nearby components preventing the wheel from rotating…
Due to a manufacturing issue, an electrical wire may have been routed incorrectly in the engine compartment causing damage to its insulation and resulting in a short circuit.
The electrical connection for the airbag crash sensor may not be secured correctly. This connector may detach due to vibrations whilst driving.
Due to a hardware issue with the airbag control unit, the airbags may become deactivated.
Due to a manufacturing defect, the wiring of the rear left and right airbags may have been reversed. Attempted deactivation of a side airbag may result in the opposite side airbag…
Due to a manufacturing defect particles may have been trapped between the fuel rail and injectors damaging the seal causing a fuel leak into the engine compartment.
Due to a manufacturing issue, the battery cable connection point may break. As a result the vehicle may experience a loss of electrical power and engine shutdown without warning.
Due to manufacturing issue, the engine compartment cover may become loose. If this occurs the engine cover may move and touch the turbocharger resulting in smouldering damage or an…
Due to a manufacturing issue, the automatic Adaptive Light System (AFS) sensors may not adjust as intended when there is a change in load or load distribution on the vehicle.
Due to manufacturing issue, the engine compartment cover may become loose. If this occurs the engine cover may move and touch the turbocharger resulting in smouldering damage or an…
Due to a software issue, the multi-media system may display video images while driving. This can result in driver distraction potentially drawing their attention away from the road…
Due to a software issue, if the Vehicle Stability Control (VSC) system is turned off, it may not default to the ON setting the next time the vehicle is started. This may result in…
Due to a manufacturing defect, the fuel piping located in the engine compartment may leak. A fuel leak in the presence of an ignition source may cause a vehicle fire.