Every safety recall published by the Australian government, searchable and filterable.
Affected vehicles have inadvertently been built without the airbag label on the passenger side sun visor. On affected vehicles there is no visible airbag label when the sun visor i…
The chemical mix ratio in some initiators used in the manufacture of seatbelt pre-tensioners may not meet specification, which may cause the initiator to malfunction. In the event…
The power steering high pressure hose may separate over time as a result of incorrect clamp fittings. If this occurs, the power steering fluid may leak.
Bolts holding the inflatable curtain in place could be affected by a manufacturing error that may cause the bolt head to detach, subsequently not fully securing the inflatable curt…
The routing of the engine harness may not provide sufficient clearance and as a result, allow contact with the Exhaust Gas Recirculation (EGR) casting bracket.Vehicles included in…
The control unit for the seat occupancy recognition on the front passenger seat may not have been installed in accordance with specifications. This could cause the pressure hose on…
On affected vehicles, there are irregularities in the mix ratio of the igniting agent in some airbag units or belt tensioners which could lead to the airbags/belt tensioners not tr…
A number of 5.0L Mustang vehicles may have reduced clearance between the battery cable wiring loom and the exhaust manifold.
The thermal overload within the ABS control unit can interrupt the current flow to the ABS control unit. This would stop the ABS from functioning correctly and would illuminate the…
The thermal overload within the ABS control unit can interrupt the current flow to the ABS control unit. This would stop the ABS from functioning correctly and would illuminate the…
The front seat belt pretensioner may not function properly due to a deviation in the seatbelt initiator generant mix ratio in some initiators.
The fuel tank ventilation line may not be correctly located. If the ventilation line rubs against the vehicle, it may wear through.
Certain Volkswagen Golf models of a limited production period may have tyre placard labels displaying the wrong specifications for the vehicle.
The camshaft could potentially crack while the vehicle is in use due to a non-compliance of the material during production process.
The reverse camera screen in the infotainment unit may freeze when the gear selector is in reverse.
As it gets older, a combination of high temperatures and humidity can cause the airbag inflator propellant to degrade.
Panorama sunroof wind deflector plate was not secured correctly during assembly and may detach while vehicle is in motion and interfere with the sunroof glass.
1. Engine vibration transmitted to the fuel tank may cause the spot weld of the bracket to break.2. Corrosion of the switch electrical terminals may develop due to water contaminat…
The electrical wiring harness for the front windshield wiper motor has not been routed correctly. Due to the movement of the windshield wiper linkage the electrical wiring harness…
Fuel hoses on specific motorcycle VINs may be faulty, which could cause a fuel leak.
The fuel filter element installed on the engine may crack if the engine is started and stopped frequently as durability of the fuel filter element is not enough to endure changes i…
The instrument panel brace may interfere with the wire harness. This interference may cause the wire harness to become damaged by the edge of the brace, causing a short circuit.
The gearshift lever resting position may mislead drivers into believing their vehicle is in the Park position when actually the vehicle's transmission is still in a drive gear.
There is a possibility that an intermittent Output Shaft Speed Sensor failure may result in an unintended downshift into first gear.
On the driver’s seat of the affected vehicles, it is possible that the Seat Height Adjustment Lifter Link may crack, or the Lifter Link Retaining Nuts may separate.