Every safety recall published by the Australian government, searchable and filterable.
The Smart Brake Support (SBS) system may falsely detect an object in front of the vehicle, which may initiate the automatic brake function.
Affected vehicles may be fitted with a Takata NADI 5-AT driver airbag inflator that could allow moisture to enter the unit and degrade the airbag propellant. If this occurs, the pr…
Affected vehicles may be fitted with a Takata NADI 5-AT driver airbag inflator that could allow moisture to enter the unit and degrade the airbag propellant. If this occurs, the pr…
Affected vehicles may be fitted with a Takata NADI 5-AT driver airbag inflator that could allow moisture to enter the unit and degrade the airbag propellant. If this occurs, the pr…
The engine valve may leak and may cause the engine intake manifold to melt or deform.
The engine valve may leak and may cause the engine intake manifold to melt or deform.
Due to an incorrectly routed section of the wiring harness, the transmission wiring harness may short circuit and shift the transmission into the neutral gear.
Due to an error in the Frontal Collision-Avoidance Assist (FCA) software, the braking assist function may fail when the vehicle approaches a stationary vehicle or a pedestrian.
The motorcycles may have a defect in the 10 amp circuit breakers.
The plastic flap on top of the airbag may tear off during the activation of the front passenger airbag.
When using child seats with ISOFIX mounting and additional support on the vehicle floor, it can lead to fatigue fractures of the ISOFIX retaining brackets. Causing the ISOFIX brack…
Affected vehicles may be fitted with a Takata NADI 5AT driver airbag inflator that could allow moisture to enter the unit and degrade the airbag propellant. If this occurs, the pro…
In extreme wet weather conditions (such as snow, ice and salt spray), the electric vacuum pump may corrode and deteriorate brake performance, which will illuminate the brake warnin…
Due to incorrect manufacture, in the event of an accident one of the two locking mechanisms in the vehicle's seat belts may not lock the seat belt as designed.
Battery acid may leak around the battery negative terminal. If copper sulphate builds up over time, this could provide a low-resistance conductive layer underneath the Battery Moni…
A section of the chassis may have a crack on the welded section of the diagonal cross member of the steering box cradle.
The wheel rims on the vehicle do not meet strength specifications. If an affected vehicle hits the kerb or crosses speed humps or uneven road conditions at high speed, the wheel sp…
Due to incorrect wiring, all lights on the trailer become inoperative when the vehicle ignition is off, including the hazard and brake lights.
Due to incorrect wiring, vehicles fitted with the tow bar wiring harness may experience the hazard warning lights to become inoperative when the key is removed from the ignition.
Due to improper programming of the Airbag Control Unit (ACU), there is a possibility that the driver, passenger airbags and seat belt pretensioners could inadvertently deploy witho…
Affected vehicles may be fitted with a Takata NADI 5-AT driver airbag inflator that could allow moisture to enter the unit and degrade the airbag propellant. If this occurs, the pr…
The Quickshifter Assembly, TSA body may come into contact with the gear change Clamp Linkage Assembly, potentially impeding a smooth “assisted” gear change, resulting in a missed g…
Due to improper assembly, the battery's negative cable terminal may break.
The tightening torque of the spare wheel support mountings might not meet specifications, which may cause the spare wheel to become loose and risk falling off.
The electro-hydraulic control unit (EHCU) software may respond incorrectly to a faulty rear wheel speed signal by activating one of the rear brakes.