Every safety recall published by the Australian government, searchable and filterable.
Vehicles fitted with a 7 speed dual clutch gearbox have a fluid leak that can lead to pressure loss in the gearbox. This pressure loss can interrupt the power transmission between…
An electrical defect may cause unexpected loss of forward lighting, including high and low beam headlights and fog lights. If this occurs, the High Beam indicator will flash on the…
If the vehicle is started via a jump-start facility and not the start/stop switch, the vehicle may be automatically switched off while driving.
The head restraints of the rear bench seats may have been installed in some vehicles with the head restraint bars of a different bench seat and/or head restraint variant.
The upper part of the rear spoiler may detach from the vehicle.
The rear axle bolts may not have been tightened in accordance with the required specifications.
The parking brake calipers may not have been manufactured in accordance with required specifications, which could result in the parking brake failing.
The bolted connection between the steering shaft and the steering rack may not be tightened to the required torque, which could lead to the bolted connection loosening.
The centre high mounted stop lamp may not be adequately attached to the vehicle and may loosen or detach.
The exhaust gas recirculation high pressure pipe may crack.
Vehicles may have been fitted with faulty head restraints, resulting in the head restraint padding separating from the securing rods.
The passenger side seat belt may not lock or restrain when the seat belt webbing is pulled out rapidly.
The software of the vehicle may not be programmed to usual specifications, resulting in the headlamp range function not working correctly.
When excessive load is applied to the steering wheel, the steering wheel hub may crack or break.The driver may experience steering wheel vibration and noise.
If the airbag is triggered in an accident, the fastener securing an air duct component in the curtain airbag may detach. This may cause the curtain airbag not to inflate sufficient…
The materials used in the oil lines may not meet the correct specifications. This can result in oil leakages while the vehicle is in operation.
The spare wheel assembly attachment bolts may loosen and cause excessive vibration, which may cause the bolts to break.
The daytime running lights (DRL) may flicker or fail to illuminate while driving.
1. The foot rest retaining pins may detach, which may result in the foot rest becoming loose or detaching.2. The rear drive oil seal may wear over time due to dust or other contami…
The service cover for the fuel pump can come into contact with the fuel filter flange under certain circumstances e.g. if the rear seats are used. This can result in the fuel filte…
The rear leaf spring may fracture due to an insufficient diameter of the front eye.
The fuel rail in petrol vehicles may develop a small heat induced crack, which can result in fuel leakage.
The Hydraulic Electronic Control Unit (HECU), responsible for the Anti-lock Braking System, Electronic Stability Control System and Traction Control System, can remain live even wh…
The front turn signal may fail and the failure may not be detected, resulting in no warning lights or sounds being activated.
The seat height adjuster seam may not have been welded in accordance with the required specifications.