Every safety recall published by the Australian government, searchable and filterable.
Due to a software issue with the Engine Control Module (ECM), the vehicle may release air pollutants that exceed the standards set in Australian Design Rule (ADR) 80/03.
Due to a manufacturing defect, the second-row seat belt buckle and lower anchor screw may become loose. As a result, the seat belt may not operate as intended.
Due to a software issue, the brake fluid warning light may not illuminate as intended to warn the driver if the brake fluid level is low. As a result, insufficient brake fluid coul…
The threaded nut securing the 12 Volt wiring harness may become loose over time. If this occurs, it could result in higher than normal electrical resistance within the harness whic…
The seat brackets in the rear cabin do not comply with Australian Design Rule (ADR 03/04) - Seats and Seat Anchorages requirements and may fail.
Due to a manufacturing defect, the locking bracket installed to secure the centre front seat in the down position may not operate as intended. This seating position is not fitted w…
The passenger backrest may become loose and break if it has been incorrectly installed and/or if the passenger uses it in contravention of the manufacturer’s information for use.
Due to a defect during assembly, the driver and passenger's seatbelt locking mechanism may engage at the incorrect point. As a result, the seatbelt could engage tightly across the…
Due to a manufacturing defect, the driver and passenger side A-pillar trims may have been fitted incorrectly. As a result, in an event of the side curtain airbags deployment the fo…
The threaded connections securing the oil pressure line may not have been tightened sufficiently. As a result, oil could leak into the engine bay and accumulate in the presence of…
Due to a software issue, the windscreen wipers may operate at half the required speed. In the event of heavy rain this may lead to poor visibility for the driver.
Due to a manufacturing defect the crankshaft position sensor may have been incorrectly routed. As a result, the sensor may contact the front exhaust system head pipe. If this occur…
The tyres fitted to vehicles within this production range do not meet the Australian Design Rule 81/02 (ADR 81/02) requirements and may result in increased fuel consumption than is…
Due to a manufacturing defect, the threaded nut securing the engine oil cooler hose may not have been tightened sufficiently. As a result, the cooler hose could become loose and de…
Due to a manufacturing defect, the low pressure fuel pipe assembly may detach. If this occurs, fuel may leak in the presence of an external ignition source resulting in a vehicle f…
Due to a software issue, the Anti-lock Braking System (ABS) control module may not operate as intended. This may result in a delay in braking performance and/or an increased effort…
Due to a manufacturing issue, the fuel hose may chafe against the engine oil level bracket and become damaged. If this occurs, fuel may leak in the presence of an external ignition…
Due to a programming issue, if the operator removes the charging cable without cancelling the charge, an electrical arc between the charging plug and the vehicle may occur.
Due to a manufacturing defect, small cracks may form in the suspension rail when towed on rough (corrugated) roads. As a result, the suspension may collapse. If this occurs, it may…
Due to a manufacturing defect, the rear driveshaft bolts may not have been sufficiently tightened during production and could become loose and detach. If this occurs, it may lead t…
Due to a manufacturing defect, the outer backrest frame of the front seats may have been incorrectly welded. As a result, the seat frame could fracture.
Due to a manufacturing issue, the fuel hose may chafe against the engine oil level bracket and become damaged. If this occurs, fuel may leak in the presence of an external ignition…
Due to an incorrect software configuration, the driver’s seat belt reminder chime and visual indicator will not activate as intended below 20 km/h. This may result in the driver no…
Due to an incorrect software configuration, the side airbags installed in the seats may unnecessarily deploy in the event of an accident.
The rear brake pedal may lose pressure due to air entering the rear brake system. As a result, it could lead to a loss of braking performance.Note: The front brakes will remain fun…