Every safety recall published by the Australian government, searchable and filterable.
In the affected models, due to variations in wiring harness routing, there is a possibility that the wiring harness insulation may wear due to contact with the engine and chassis.
Due to a manufacturing defect, the pipes to the rear brake system may have been incorrectly assembled. As a result, the Anti-Lock Brake System (ABS) and the Electronic Stability Pr…
Due to a manufacturing defect, the steering damper may be defective. As a result, the rider could experience unexpected increased steering effort leading to a loss of vehicle contr…
Due to a manufacturing defect, the spare tyre carrier connection bolts may not have been fastened with sufficient torque and could become loose. As a result, the spare tyre and car…
Due to a manufacturing defect within the battery isolation switch sourced from an external supplier it could be susceptible to water ingress.
Due to a manufacturing defect, the lower clamp connecting the front suspension to the steering may fracture. This could lead to a loss of vehicle control whilst riding.
Due to a manufacturing defect, an electrical connection within the vehicle’s starter generator may not have been assembled to specifications. This could cause a sudden loss of powe…
Due to a manufacturing defect, under certain driving conditions the engine cooling fan fuse may fail. As a result, the engine may overheat leading to a sudden loss of motive power…
Due to a manufacturing defect, the main electrical control unit to the rear lamps may cause the electrical connection to overheat. As a result, the rear lamps may not illuminate as…
Due to a software issue, the instrument panel cluster may fail to display the visual seat belt warnings, vehicle speed, fuel level, engine status and other critical safety informat…
Due to a manufacturing defect, the headlight Printed Circuit Board (PCB) wiring may become damaged over time due to vibration. If this occurs, the headlights may not operate as in…
The Raised Air Intake (RAI) snorkel fitted to certain vehicles may have not been secured to the required specifications and could detach from the vehicle whilst driving.
Due to a manufacturing defect, the stop rivets on the adjustment rails of the rear seats may have not been installed. As a result, the seats could move beyond the defined end posit…
Due to incorrect Battery Management System (BMS) software calibration, the calculated battery state of charge may rapidly fluctuate. This may cause the vehicle to activate limp-hom…
Due to a manufacturing defect, the rear axle brake hoses may become damaged over time. If this occurs it could lead to a brake fluid leak resulting in reduced braking performance.
Due to a manufacturing defect, the cell modules installed in the high voltage battery may be defective. As a result, it could cause a thermal overload leading to a vehicle fire whe…
Due to a software issue, the Battery Monitoring Unit (BMU) in vehicles equipped with a high voltage battery may be defective. As a result, it could cause invalid cell voltage and i…
The front axle brake hoses could become defective over time due to high temperature and moisture. This may lead to a brake fluid leak resulting in a reduction in braking performanc…
Due to a manufacturing defect, the steering wheel touch sensors may be defective. As a result, the vehicle may not accurately detect the driver's hands on the steering wheel and th…
A number of Toyota Hiace vehicles modified in accordance with Model Report MRE-000038 include a built-in hoist for lifting a wheelchair and a wheelchair tie-down and occupant restr…
Due to a software issue, the high-voltage starter generator may experience an intermittent overload, which could deactivate functions of the system. If this occurs, the vehicle may…
Due to a calibration issue, the LED Matrix HD headlights may have been adjusted incorrectly. As a result, oncoming traffic could be dazzled by the dipped beam.
Due to a manufacturing issue, the front seat belt webbing material may have been damaged or lightly scored during assembly.
Due to a software issue, the Door Control Unit (DCU) for the drivers and front passenger doors may not operate as intended. As a result, it could prevent the doors from locking or…
Due to a manufacturing defect, the rear seat belt buckles may have been incorrectly anchored. As a result, the seat belt may not operate as intended.