Every safety recall published by the Australian government, searchable and filterable.
Component Gaskets Do Not Comply Resulting In Lp Gas Leak From The Lpg Cylinder.
The Sunshade May Fracture And Become Detached From The Vehicle Under Extreme Wind Forces.
Hose Material May Deteriorate & Allow Fuel Leakages Which May Ignite On The Hot Exhaust System And Start A Fire.
Defect In A Front Suspension Component.
A Potential Exists For Interference Between Water Hose Clip And Fuel Feed Hose.
The Four Speed Auto Transmission May Not Be Fully Engaged In Park When Level Is Placed In 'p' Position.
Kickdown Cable May Not Fully Retract Which Could Cause The Accelerator Not To Return To The Idle Position.
Kickdown Cable May Become Dislodged Which Could Cause The Accelerator Not To Return To The Idle Position.
Thermal Radiation From Catalyst Can Develop With Existing Heat Shield, An Underbody Fire May Break Out.
Plastic Trim Could Be Damaged Preventing The Safety Belt Tongue From Latching.
Engine Oil Cooler Pipe May Come Into Contact With Hydraulic Brake Pipe.
Throttle Cable In Contact With The Brake Pipe Leading To The Proportioning Valve.
Possibility Of Hydraulic Fluid Leakage Resulting In A Loss Of Power Assistance In Braking System.
Rear Window Demister Fuse Can Exceed Rated Capacity. Main Stop Lamps Will Be Rendered Inoperative If Fuse Should Blow.
Cruise Control Mechanism Fitted To These Vehicles May Fail To Cancel In The Normal Manner.
Heat Shield May Crack Due To Vibrations - Under Rare Circumstances May Obstruct Steering To The Right.
Loose Bolt On Single Leaf Spring.
Loss Of Brake Light Operation.
Fitment Of New Compliance Plates; Check Torque To Seat Belt Bolts; Replace Drivers Seat Belt Mechanism Complete.
Adjustable Steering Column To Be Replaced As Universal Joint Bearing Caps May Not Have Been Stamped Correctly.
Adjustable Steering Column To Be Replaced As Universal Joint Bearing Caps May Not Have Been Stamped Correctly.
Incorrect Gear Selection Lever Installation On 4 Speed Automatic Transmission Could Cause Incomplete Park Selection
Vans May Have Sustained Slight Damage To The Fuel Tanks During The Installation Of Fixtures And Fittings.
Rear Brake Line Assembly Could Develop A Fatigue Fracture Leading To Loss Of Brake Fluid & Braking Capability.
The Steel Ball Internally In The Tank May Become Stuck Causing Inner Pressure Of The Fuel Tank To Build Up.