Every safety recall published by the Australian government, searchable and filterable.
The material used for the wastegate valve plug in the exhaust system may be incorrect.
The thermal fuses fitted in the engine bay may not have been installed by the bus or coach bodybuilders. The thermal fuses form part of the fire hazard warning equipment.
The vacuum control hose between the Exhaust Gas Recirculation valve and the Electronic Vacuum Regulator may become chafed or heat affected due to close proximity to a heat shield.…
The jack supplied does not comply with the labelling and safe usage instruction requirements of Clause 7 of the vehicle jack safety standard.
Some vehicles may not have Child Restraint Anchorages (CRAs) fitted, or the CRAs may be incorrectly fitted.
There is a possibility for the internal electrical circuit of the headlight switch on your vehicle to be improperly wired which may cause unintentional headlight and/or turn signal…
The left side mirror stem may break and fall off the vehicle, possibly without warning thus present an unreasonable risk of accident.
BMW Vehicle Jacks that have been purchased as replacement parts from authorised BMW Dealers have not been supplied with the required safe usage and maintenance instructions and tha…
The vehicle may have been assembled with cracked front knuckles in the tie rod ball joint attachment. These knuckles may fail under heavy loading or impact.
A fuel pulsation damper is located at the end of the fuel rail to reduce fuel pulsation generated by the fuel injectors. The fuel pulsation damper was improperly assembled during…
May experience a loss of power assist to the brakes, due to a collapsed brake booster vacuum hose. Loss of brake booster vacuum without warning may result in increased pedal effor…
A crack can occur in the protective sheath of the flexible front brake hoses.
There is a possibility that the front brake hose can be twisted due to the location of the front brake hose mounting bracket and as a result the front brake hose may be put under e…
The rear disc brake may crack.
The rear shock absorber mounting bracket welded to the frame may crack with extended usage.
The power steering rack hydraulic unions may not have been tightened to the correct torque during assembly. This could lead to a loss of power steering fluid and possible loss of…
The jacks are not labelled in accordance with the mandatory standard. The safety warning label on the vehicle's jack uses a pictogram only and does not include specific wording re…
The plastic pipe for the park brake valve may become detached because it has not been correctly fitted in the union.
The possibility exists for the Fog Lamp bulb sockets to come adrift from their mounting, allowing the globes to make contact with the inner portion of the front bumper bar.
Internal hexagon bolts securing the pipe connections on the hydraulic motor for the engine-cooling fan have no thread-locking compound on a number of vehicles.
Sound absorbing material attached to the roof of the vehicle may loosen and drop onto the third row outboard seat belt assemblies. this could render the seat belts inoperative.
Due to water entering into the ABS hydraulic block computer connector the ABS warning light will come on, disarming the ABS system.
The rear lower spring strut threaded connection may cause a failure of the mounting bolt.
The pressure switch that senses the door open function and applies the park brake may not function correctly.
When power is lost to the vehicles indicators the dashboard indicator tell tale still shows that external lamps are working correctly.