Every safety recall published by the Australian government, searchable and filterable.
Due to a manufacturing defect, vehicle management systems connected to the fuse box may fail. If this occurs, it may lead to a sudden loss of motive power and/or a vehicle fire. Ce…
Due to a manufacturing defect, the top seal in the steering bevel unit is susceptible to water and dust ingress. As a result, the steering may become notchy and potentially lock wh…
The connecting rod and/or crankshaft engine components may have manufacturing defects that can lead to engine damage and engine failure. This may result in a no start condition, en…
Due to a manufacturing defect, the front suspension swivel housing may not meet specifications. As a result, the connection between the axles and the steering arms could fail leadi…
Due to a manufacturing defect, the left-hand engine camshaft sprocket may fracture. As a result, the engine could stall leading to a sudden loss of motive power whilst driving.
The driver’s seat belt safety cap may have been incorrectly installed and could become loose. As a result, the seat belt may not operate as intended.
Due to a software issue, under certain driving conditions the Integrated Electronic Brake (IEB) system may affect the hydraulic pressure within the Anti-lock Braking System (ABS).…
In the affected models, due to variations in wiring harness routing, there is a possibility that the wiring harness insulation may wear due to contact with the engine and chassis.
Due to a manufacturing defect, the pipes to the rear brake system may have been incorrectly assembled. As a result, the Anti-Lock Brake System (ABS) and the Electronic Stability Pr…
Due to a manufacturing defect, the steering damper may be defective. As a result, the rider could experience unexpected increased steering effort leading to a loss of vehicle contr…
Due to a manufacturing defect, the spare tyre carrier connection bolts may not have been fastened with sufficient torque and could become loose. As a result, the spare tyre and car…
Due to a manufacturing defect within the battery isolation switch sourced from an external supplier it could be susceptible to water ingress.
Due to a manufacturing defect, the lower clamp connecting the front suspension to the steering may fracture. This could lead to a loss of vehicle control whilst riding.
Due to a manufacturing defect, an electrical connection within the vehicle’s starter generator may not have been assembled to specifications. This could cause a sudden loss of powe…
Due to a manufacturing defect, under certain driving conditions the engine cooling fan fuse may fail. As a result, the engine may overheat leading to a sudden loss of motive power…
Due to a manufacturing defect, the main electrical control unit to the rear lamps may cause the electrical connection to overheat. As a result, the rear lamps may not illuminate as…
Due to a software issue, the instrument panel cluster may fail to display the visual seat belt warnings, vehicle speed, fuel level, engine status and other critical safety informat…
Due to a manufacturing defect, the headlight Printed Circuit Board (PCB) wiring may become damaged over time due to vibration. If this occurs, the headlights may not operate as in…
The Raised Air Intake (RAI) snorkel fitted to certain vehicles may have not been secured to the required specifications and could detach from the vehicle whilst driving.
Due to a manufacturing defect, the stop rivets on the adjustment rails of the rear seats may have not been installed. As a result, the seats could move beyond the defined end posit…
Due to incorrect Battery Management System (BMS) software calibration, the calculated battery state of charge may rapidly fluctuate. This may cause the vehicle to activate limp-hom…
Due to a manufacturing defect, the rear axle brake hoses may become damaged over time. If this occurs it could lead to a brake fluid leak resulting in reduced braking performance.
Due to a manufacturing defect, the cell modules installed in the high voltage battery may be defective. As a result, it could cause a thermal overload leading to a vehicle fire whe…
Due to a software issue, the Battery Monitoring Unit (BMU) in vehicles equipped with a high voltage battery may be defective. As a result, it could cause invalid cell voltage and i…
The front axle brake hoses could become defective over time due to high temperature and moisture. This may lead to a brake fluid leak resulting in a reduction in braking performanc…