Every safety recall published by the Australian government, searchable and filterable.
Air Cleaner Baffle May Dislodge, Rest On Cleaner Element, And May Lodge In The Throttle Body.
Rear Bogie Suspension Spring Leaf May Fail Leading To A Possible Reduction In Directional Control Of The Vehicle.
Part Of The Bonnet Secondary Catch Fixture Was Omitted From Assembly - Bonnet May Lift While Vehicle Is In Motion.
Part Of The Bonnet Secondary Catch Fixture Was Omitted From Assembly - Bonnet May Lift While Vehicle Is In Motion.
Incorrectly Assembled.
Incorrect Compliance Plate And Identification Plate And Relevant Park Brake Specification Change Required.
The Sunshade May Fracture And Become Detached From The Vehicle Under Extreme Wind Forces.
Defect In A Front Suspension Component.
A Potential Exists For Interference Between Water Hose Clip And Fuel Feed Hose.
The Four Speed Auto Transmission May Not Be Fully Engaged In Park When Level Is Placed In 'p' Position.
Kickdown Cable May Not Fully Retract Which Could Cause The Accelerator Not To Return To The Idle Position.
Kickdown Cable May Become Dislodged Which Could Cause The Accelerator Not To Return To The Idle Position.
Plastic Trim Could Be Damaged Preventing The Safety Belt Tongue From Latching.
Rear Window Demister Fuse Can Exceed Rated Capacity. Main Stop Lamps Will Be Rendered Inoperative If Fuse Should Blow.
Cruise Control Mechanism Fitted To These Vehicles May Fail To Cancel In The Normal Manner.
Heat Shield May Crack Due To Vibrations - Under Rare Circumstances May Obstruct Steering To The Right.
Loose Bolt On Single Leaf Spring.
Loss Of Brake Light Operation.
Fitment Of New Compliance Plates; Check Torque To Seat Belt Bolts; Replace Drivers Seat Belt Mechanism Complete.
Incorrect Gear Selection Lever Installation On 4 Speed Automatic Transmission Could Cause Incomplete Park Selection
Breakage Of The Handlebar Retaining Bolt And Possible Detachment Of The Handlebar.
Some Simmons Wheels May Be Prone To Cracking Of The Inside Rim Of The Wheel Causing Loss Of Tyre Pressure.
Compliance Plates Do Not Display The Date Of Build.
Rear Spring Hanger Cracking Which Could Affect Rear Axle Location.
Defect On The Rear Spring Hanger Brackets Adversely Affecting Vehicles' Handling.