Every safety recall published by the Australian government, searchable and filterable.
Built With An Isolator Mount System That Could Lose Clamp Load Which May Allow The Engine To Move Unexpectedly Within The Frame And Cause An Unintended Distraction To The Operator.
Built With A Negative Battery Cable That Could Break Which Could Cause The Engine To Stall/quit When Riding.
Rear Shock Absorber Eye Could Break Which Could Result In The Underside Of The Vehicle Dragging On The Ground Which May Adversely Affect Handling.
Sidestand Switch Could Become Inoperative Causing The Engine To Stall/quit When Riding.
Built With A Fuel Tank Mount System That Could Allow The Fuel Tank To Become Separated From The Motorcycle In The Event Of A Severe Collision.
The Swingarm Could Break Which Could Result In Vehicle Handling Being Adversely Affected.
Owners Manual Handbook Supplied In The Vehicles Are Printed For Another Market And Do Not Contain Some Of The Specific Information For Australia Such As Child Restraint Anchorage P…
May Have Incorrectly Torqued Front Spindle Upper Ball Joint Retaining Bolts.
Front Centre Seat Belts Have A Passenger Airbag Warning Label Attached To The Belt Which Prevents The Belt From Being Shortened To A Level Which Complies With ADR.
The Potential Exists For The Surface Of Each Heated Seat To Reach An Unacceptably High Temperature. In Extreme Cases, This Could Cause Damage To Anything In Contact With The Seat C…
The Potential Exists For The Surface Of Each Heated Seat To Reach An Unacceptably High Temperature. In Extreme Cases, This Could Cause Damage To Anything In Contact With The Seat C…
Potential For Loss Of Timing Chain Tension Causing Cam Timing To Become Out Of Adjustment, And Under Extreme Circumstances Could Lead To A Loss Of Vehicle Control.
Cruise Control Cable May Interfere With The Cruise Control Servo Pulley And Not Allow The Throttle To Return To Idle When Disengaging The Cruise Control. If The Cruise Control Is…
The Side Airbags May Unexpectedly Deploy, For Example When Driving At Speed Over A Large Pothole Or Curbside. The Airbag Control Unit Needs To Be Re-programmed. Also The Clip Be…
Due To The Materials Used In Manufacturing The Front Chain Drive Sprocket Locking Plate, It Can Possibly Wear Causing The Locking Function Of The Plate To Fail And No Longer Lock T…
Failure May Occur Of The Torque Rod Pin That Assists In The Location Of The Rear Drive Axles,
A Wiring Harness Close To The Top Of The Accelerator Pedal May Interfere With The Travel Of The Pedal Which Could Possibly Hold The Accelerator Open.
A Wiring Harness Close To The Top Of The Accelerator Pedal May Interfere With The Travel Of The Pedal Which Could Possibly Hold The Accelerator Open.
The Wheel Bolts And The Alloy Wheel May Not Be Compatible In The Wheel Bolt Seat Area, Therefore The Wheel Bolt May Not Seat Correctly And As A Consequence Lead To The Wheel Coming…
Lower Crankcase Bolt Replacement Due To Oil Weep From Between The Engine Crankcase Halves Which Could Cause Vehicle Instability.
The Sensing And Diagnostic Module Which Is Part Of The Supplemental Restraint System May Have Been Manufactured With Potentially Faulty Microprocessors Which May Sense Inaccurate I…
May Be Insufficient Weld Penetration Of The Spot Weld That Attaches The Child Restraint Anchorage Bracket To The Rear Panel.
The Bolts Securing The Upper Suspension Arm To Upper Arm Bushes May Be Affected By Hydrogen Embrittlement Resulting In Suspension Noise And In Extreme Cases, Upper Arms May Separat…
The Vehicle-down Sensor May Be Dislodged From Its Normal Mounting Position During Battery Maintenance. If The Sensor Is Not Correctly Installed The Engine May Stop In Certain Situ…
Possible Lack Of Lubrication During Assembly Of The Rear Axle Roller Bearing Which May Cause A Failure Of This Component.