Every safety recall published by the Australian government, searchable and filterable.
The linkage between the front windscreen wipers and the motor may not have been secured in accordance with required specifications, which may cause the front windscreen wipers to f…
An electrical defect may cause unexpected loss of forward lighting, including high and low beam headlights and fog lights. If this occurs, the High Beam indicator will flash on the…
If the vehicle is started via a jump-start facility and not the start/stop switch, the vehicle may be automatically switched off while driving.
The head restraints of the rear bench seats may have been installed in some vehicles with the head restraint bars of a different bench seat and/or head restraint variant.
The rear axle bolts may not have been tightened in accordance with the required specifications.
The parking brake calipers may not have been manufactured in accordance with required specifications, which could result in the parking brake failing.
The bolted connection between the steering shaft and the steering rack may not be tightened to the required torque, which could lead to the bolted connection loosening.
The centre high mounted stop lamp may not be adequately attached to the vehicle and may loosen or detach.
Vehicles may have been fitted with faulty head restraints, resulting in the head restraint padding separating from the securing rods.
When excessive load is applied to the steering wheel, the steering wheel hub may crack or break.The driver may experience steering wheel vibration and noise.
The spare wheel assembly attachment bolts may loosen and cause excessive vibration, which may cause the bolts to break.
The daytime running lights (DRL) may flicker or fail to illuminate while driving.
1. The foot rest retaining pins may detach, which may result in the foot rest becoming loose or detaching.2. The rear drive oil seal may wear over time due to dust or other contami…
The rear leaf spring may fracture due to an insufficient diameter of the front eye.
The front turn signal may fail and the failure may not be detected, resulting in no warning lights or sounds being activated.
The seat height adjuster seam may not have been welded in accordance with the required specifications.
The scooter's main stand may crack and break due to substandard welding.
The vehicle's rear axle steel leaf springs may not meet the required level of strength during operation and may break during use.
As a result of excessive movement and vibration, the fuel pipes under the vehicle may become damaged, resulting in a diesel fuel leak.
The steering gear box fastening screws may be missing, fitted with incorrect extended screws or non-original screws have been installed that may be loose.
Due to the improper plating on the moveable contacts on the horn and starter switch, if continuously used, dust or water could enter the switch block, which could lead to corrosion…
Due to improper assembly of the electrical contacts in the seat belt reminder switch, the driver's seat belt reminder system may fail to switch off after repeated use of the seat b…
The gear shift lever may become loose from the ball joint, resulting in excessive movement at the end of the shift lever.
The vehicle's tie rod end may prematurely fail due to dry steering.
Due to an improper manufacturing process, the vehicle side stand may break.