Every safety recall published by the Australian government, searchable and filterable.
The inverter assembly is part of the hybrid system. The transistors on the control boards located inside the inverter assembly in some of the involved vehicles were inadequately s…
The positioning of the wiring harness bracket can induce a resonance in the wiring harness. The resonance can potentially cause the wiring harness to disconnect and render the reve…
It is possible that the alternator wiring harness may have been incorrectly routed and could contact other components.
The mudflaps do not conform to ADR42/04.
Poor earthing connection within the main engine wiring harness.
The air-conditioner compressor may have been wired incorrectly, reversing the polarity and operating the compressor in reverse.
The screws used to fix the front mudguard fitted on Thunderbird and Thunderbird ABS motorcycles may have a potential problem.
Possible loosening of the centifugal engine oil filter assembly
There is a potential condition of unsafe operation concerning part of the rear seat belt anchor and buckle assemblies.
The connectors for the fuel pressure line and the purge line may have been switched during production.
The harness sleeve located at the connection of the tailgate and the body is not secured in a manner that can be guaranteed over time.
There is a potential concern with the automatic transmission shift lever cable on this vehicle. There is a possibility that this cable was incorrectly fitted, and may result in inc…
The headlight cleaning pump may affect the washer fluid level sensor.
There have been several occurrences where the Meritor diff housing has cracked.
There is an internal non-conformity in the driver's side windscreen wiper motor.
The select suspension fasteners on your vehicle may not have been tightened properly and under certain driving conditions may become loose.
As a result of oil leaking from the rear of the transfer box, the park brake shoes may become contaminated with oil.
The right side support member, located in the engine bay, may be cracked.
The valve on the vacuum pump in the brake assistance circuit may have a manufacturing non-conformity.
A bonding condition may exist with the glass panel on the sunroof.
A bonding condition may exist with the glass panel on the sunroof.
The cruise control system may not operate correctly.
The braking assistance circuit vacuum pump valve in very rare cases may have problems opening.
In certain conditions (downshifting or manoeuvring with the clutch disengaged with the engine at idle) it is possible that the engine may stall.
The front wiper blade motors have an internal non-conformity.