18 safety recalls published for the Volvo S80 (1998–2019).
The flexible steel cable connected to the seat belts on the outboard side of the front seats may fatigue and separate from the seat belt, resulting in the seat belt not restraining…
Early wear on the auxiliary belt tensioner.
Early wear on the auxiliary belt tensioner.
Early wear on the auxiliary belt tensioner.
The power steering return line may fail due to incorrect routing of the power steering cooling line. Should this condition occur, it may result in a sudden drainage of power steeri…
The engine oil level may be above the maximum level marking. If the engine oil level is above maximum it may lead to increased engine speed.
The software calibration for fuel cut-off functionality in the engine control module (ECM) and the transmission control module (TCM) is too sensitive.
Investigations have identified early wear on the the belt tensioner.
Early wear on the belt tensionser.
Volvo Car Corporation investigations have identified that the fuel Pump Electronic Module (PEM) may in certain conditions not wake up as intended which, in turn, inhibits the start…
Volvo Car Corporation have identified that the engine cooling fan may permanently stop working due to a software error in the Fan Control Module (FCM). If the fan stops it may caus…
Volvo Car Corporation have identified a deviation in the CEM (Central Electronic Module) software that may affect the functionality of the windshield wipers. If this condition occ…
The B+ terminal may be in conflict with the starter motor solenoid in the cars concerned.
Under certain operating conditions some electric cooling fans may overheat potentially causing heat damage and, in rare instances, a fire in the engine compartment.
Under certain operating conditions some electric cooling fans may overheat potentially causing heat damage and, in rare instances, a fire in the engine compartment.
Under certain operating conditions some electric cooling fans may overheat potentially causing heat damage and, in rare instances, a fire in the engine compartment.
The front control arms have not been manufactured within the agreed specifications, resulting in the stud and nut, securing the front control arm to the spindle, to possibly lose i…
The ball joint in the front suspension may exhibit increased wear which may affect the steering.