18 safety recalls published for the Toyota Camry (2013–2019).
The fuel pump on affected vehicles may stop operating. If the fuel pump stops working, warning lights and messages may display on the instrument panel, and the engine may not run…
Due to incorrect manufacture, in the event of an accident one of the two locking mechanisms in the vehicle's seat belts may not lock the seat belt as designed.
Some brake booster pumps may be manufactured improperly, and may cause the brake assist function to stop operating while driving.
The sliding electrical contacts in the driver's side power window master switch may have been lubricated with insufficient quantity of grease. During normal operation, wear residue…
The sliding electrical contact module in the driver’s-side power window master switch may exhibit a “sticky” feel during operation. This is due to the non-uniform application of l…
On some vehicles, there is a possibility that the fuel hose that connects the main fuel supply line to the engine may have become wrinkled during manufacture. This could result in…
The No 1 rear suspension arm may have been incorrectly welded. In instances where the weld is not to specification the arm may break at the bush housing weld area and in the worst…
An assembly error in production may result in pinching of the charcoal canister (fuel vapour storage canister) vent hose. In this condition, high vacuum in the fuel tank may cause…
The Dimmer Switch Contact Points And Contact Arms May Become Overheated And Cause Erratic Operation Of The Headlights.
Potential Exists For One Side Of The Seat Track Lockikng Mechanism Of The Two Front Seats To Only Partially Engage Or Not Engage At All.
Potential Exists For The Steering Wheel Retaining Nut To Loosen And Cause The Steering Wheel To Become Loose.
Potential Exists For A Failure Of The Power Door Lock Control Relays Which May Cause Contacts To Weld.
Rear Brake Hoses May Be Incorrectly Positioned.
Air Cleaner Baffle May Dislodge, Rest On Cleaner Element, And May Lodge In The Throttle Body.
Brake Fluid Leak May Occur From One Circuit Of Proportioning Valve Causing Loss Of Brake Efficiency.
Defect In Front Seats Causes Them To Unintentionally Recline Without Warning.
Brake Master Cylinder Part No Jb 1225 Fitted Are Faulty. Incorrect Assembly Of Brake Piston Can Result In Brake Failure.
Possible Fuel Leakage From Fuel Hose.