Every published safety recall for Subaru vehicles in Australia, sourced directly from the government register.
Due to the programming of the Heating, Ventilation, and Air Conditioning (HVAC) control ECU software. Under certain conditions, such as a specific failure mode of the electric comp…
Due to a manufacturing issue, the Continuously Variable Transmission (CVT) inhibitor switch may not be sealed sufficiently allowing moisture to enter potentially causing corrosion…
The front drive shaft may not meet manufacturing specifications and the outer race of the front driveshaft may crack. If this occurs, the vehicle will stop operating while in motio…
Due to a potential design concern with the rear tail lights control circuit, the turn and hazard indicators lamps may not illuminate as intended.
The reverse lamps may not illuminate and the rear-view reverse camera may not display the rearwards image when reversing as intended.
Due to a manufacturing issue, the Electronic Park Brake (EPB) adaptor cord connector may not operate as intended. This could result in vehicle moving or rolling away whilst the veh…
Due to the incorrect software logic being installed on the Vehicle Dynamic Control (VDC) the post collision brake control function may not operate as intended and fail to apply the…
Due to a software issue in the pre-collision braking system of the EyeSight® System, the pre-collision braking feature may be activated unexpectedly.
The fuel pump impeller may not meet manufacturing specifications, as a result it may become deformed. This may cause the fuel pump to stop working and may lead to the vehicle stall…
Due to improper Engine Control Module (ECM) programming, the ignition coil may overheat, creating a short circuit which may blow the ignition coil fuse.