Every published safety recall for Kenworth vehicles in Australia, sourced directly from the government register.
A manufacturing defect in the vehicle’s air system may experience a delay in charging the front brake circuit. This could result in a loss of braking performance of the front brake…
Due to the improper assembly of a single check valve incorporated into the pneumatic braking circuit internal components may become dislodged. This can result in unintended braking…
A pneumatic valve in the Hill Start Assist system may be incorrectly connected.
Retaining bolts for the pivot pins may not be fitted.
The Cummins ISMe5 engine software can allow the engine to operate without the use of diesel exhaust fluid.
Faulty ABS pressure modulation valves on drive axles.
The affected vehicles are not compliant with the latest ADR regulations. The vehicles are fitted with a lap belt on the passenger side instead of a lap sash belt as per ADR regulat…
The turbo heat shield mounting could break and cause the steering shaft to jam; this may require extra effort to turn the vehicle
The clip that holds the Variable Valve Actuator (VVA) oil supply line is missing. The omission of the VVA oil line clip could result in premature wear of the line causing an oil l…
In certain TAS85 steering gears an incorrect profile on the sector shaft gear may lead to chipping and damage of the gear. These chips can cause the steering to bind or stick durin…