Hino 300 Series
- Affected
- 7,756
- Category
- Trucks and buses
- Campaign
- A9790
- Supplier
- Hino Motor Sales Australia Pty Ltd
The defect
The threaded end of the bolt installed on the air conditioner condenser bracket faces the slit of the corrugated tube of the wire harness and under certain operating conditions, such threaded end of the bolt may cause interference with the wires of the wire harness through the slit of the corrugated tube.
The hazard
This interference may damage the wires, causing a short circuit resulting in the engine stalling.
The remedy
All owners of affected vehicles will be contacted individually by letter.All vehicles involved in this campaign will have the following works carried outin accordance with the Hino work procedure sheet:Change the mounting direction of the bolt and nut installed on the air conditioner condenser bracket. Remove the designated portion of the corrugated tube and confirm that none of the wires in the wire harness, inside the corrugated tube are damaged. Repair the wires if damaged and replace the removed portion of the corrugated tube.
What to do
- 1Check if your vehicle is affected. This recall covers 7,756 vehicles. Use your VIN to confirm.
- 2Contact Hino Motor Sales Australia Pty Ltd to arrange inspection and repair.
- 3Repairs are free of charge when arranged through an authorised dealer.
- 4Verify this recall on the official government register: vehiclerecalls.gov.au ↗
Related recalls
Recall data sourced from vehiclerecalls.gov.au under CC BY 4.0.