14 safety recalls published for the Peugeot 307.
The valve on the vacuum pump in the brake assistance circuit may have a manufacturing non-conformity.
These vehicles had a previous safety recall campaign to download new lighting control software to the management system. There is a possibility that this software upgrade did not c…
The recall campaign consists of downloading a new version of vehicle exterior lighting software which is necessary to prevent the lighting switch position from being incorrectly de…
A component may have a manufacturing non-conformity which in time could alter the braking assistance.
A component of the vacuum pump in the brake assistance circuit may have a manufacturing non-conformity which in time could alter the braking assistance.
In rare cases the rear cross-member and the rear small side members do not comply with manufacturer's specifications.
In rare cases, the Exhaust Gas Recirculation Valve (EGR) may cause hard starting/stalling and cause the engine diagnostics warning light to illuminate on the instrument panel.
The engine management software can, in rare cases, cause imperfect management of the engine fuel supply which could lead to engine damage.
The brake pipe cradle can rub the adjacent brake pipe causing a loss of fluid.
Replacement of Plush Velour Floor Mats if fitted to vehichle, to eliminate the possible risk of the floor mat coming into contact with the accelerator pedal.
Oscillation of the motorised throttle valve may cause breakage of the throttle stop. The engine may be placed in the emergency program phase (limp mode) with a possible reduction…
Download Engine ECU Software. This action is necessary to eliminate oscillation of the motorized throttle valve which, in extremely rare cases, may cause breakage of the throttle…
Safety recall to check and, if necessary, replace the front suspension pivot(s) and pivot ball joint(s). This action is necessary to eliminate the risk of a vehicle trajectory out…
There is a risk that the left-hand front anti-roll bar linkage may come into contact with the brake pipe.