Every published safety recall for Buell vehicles in Australia, sourced directly from the government register.
The front brake line on the subject motorcycles may contact the front tyre. This contact could cause a hole to develop in the front brake line, allowing brake fluid to leak. This c…
The motorcycles have a front brake line which may contact the front tyre. The condition could cause a hole to develop in the front brake line, allowing brake fluid to leak.
The compnay has determined that windshields on these model motorcycles, built during the above date range and fitted with a rubber-mounted nut (part numbr M025.1AV), may become dis…
Vehicles can experience 5th gear galling on the clutch shaft due to lack of lubrication.This condition can allow the gear to seize to the shaft, resulting in rear wheel lock-up. S…
Certain vehicles may have a vibration at the mounting location of the bank angle sensor which, if combined with any misrouting of various wires that impinge on the sensor or its pi…
Either the pivot bolt for the sidestand leg or the mounting bracket bolts could break (possibly without notice) and could cause the motorcycle to fall.
Due to misrouting, the horn power wire can become frayed from unintended contact with a horn bracket mounting bolt, which if it occurs could lead to exposed wire causing a number o…
The idle control cable may become dislodged from the fuel injection system cable guide due to improper adjustment of the throttle control system. Should this occur, the throttle m…
There is a possibility that the Side Support Stand may have a safety defect that could cause them to bend or break without notice, thereby allowing the motorcycle to fall and pote…
The muffler could break allowing it to drag on the ground which may adversely affect the handling of the vehicle and could result in an accident.