2015–2016 G & S Chassis Chassis
- Affected
- 0
- Category
- Caravans and motorhomes
- Campaign
- 17-01
The defect
There is a risk of insufficient weld penetration and/or overgrinding of the weld on the suspension trailing arm elbow resulting in reduced material thickness.
The hazard
The suspension arm may break causing the chassis to become unstable, potentially becoming a hazard to other road users.
The remedy
Consumers who have a caravan built with a chassis manufactured between May 2015 and June 2016 or have a chassis that has been manufactured by G&S Chassis that has a Control Rider TS Suspension System should immediately cease using their caravan.The chassis number and manufacture date can be found in the G&S Chassis Warranty and Service Handbook, or consumers can go to www.gnschassis.com.au for instructions on how to check the chassis. If in any doubt consumers should contact G&S Chassis on 03 9357 0227 or email recall@gnschassis.com.au, quoting G&S Technical Service Inspection No 17-01.G&S Chassis will put affected consumers in touch with an approved repair agent to undertake an inspection and any repairs.
What to do
- 1Check if your vehicle is affected. This recall covers 0 vehicles. Use your VIN to confirm.
- 2Contact the manufacturer to arrange inspection and repair.
- 3Repairs are free of charge when arranged through an authorised dealer.
- 4Verify this recall on the official government register: vehiclerecalls.gov.au ↗
Recall data sourced from vehiclerecalls.gov.au under CC BY 4.0.